Tag: p400

Get and install the software first: If you have XenServer 6.0, you can get it with the commands below. cd /tmp wget ftp://ftp.hpe.com/pub/softlib2/software1/pubsw-linux/p1980463820/v89068/hpsmh-7.3.0-9.i386.rpm wget ftp://ftp.hpe.com/pub/softlib2/software1/pubsw-linux/p640342176/v80069/cpqacuxe-9.40-12.0.i386.rpm rpm -ihv hpsmh-7.3.0-9.i386.rpm rpm -ihv cpqacuxe-9.40-12.0.i386.rpm For XenServer 6.5 you need 64-bit versions of these archives: cd /tmp wget http://downloads.linux.hpe.com/downloads/ManagementComponentPack/CentOS/5.0Server/x86_64/9.40/hpsmh-7.2.2-8.x86_64.rpm wget http://downloads.linux.hpe.com/downloads/ManagementComponentPack/CentOS/5.0Server/x86_64/9.40/cpqacuxe-9.40-12.0.x86_64.rpm rpm -ihv hpsmh-7.2.2-8.x86_64.rpm rpm -ihv cpqacuxe-9.40-12.0.x86_64.rpm And for XenServer 7+: cd /tmp wget http://downloads.linux.hpe.com/downloads/ManagementComponentPack/CentOS/7.2Server/x86_64/10.50/hpsmh-7.6.0-11.x86_64.rpm wget http://downloads.linux.hpe.com/downloads/ManagementComponentPack/CentOS/5.0Server/x86_64/9.40/cpqacuxe-9.40-12.0.x86_64.rpm rpm -ihv hpsmh-7.6.0-11.x86_64.rpm rpm -ihv cpqacuxe-9.40-12.0.x86_64.rpm After installing the software for your version of XenServer, make sure ACU traffic is allowed: vi /etc/sysconfig/iptables Search for: -A RH-Firewall-1-INPUT -j REJECT –reject-with icmp-host-prohibited Insert the line below right before the line found: -A…